NOTE: For Ubuntu 16.04 LTS and above, the AMD Catalyst or fglrx driver is no longer supported by AMD, or in Ubuntu.{1} If you have an AMD GPU and wish to run any Ubuntu version 16.04 LTS or newer, there are two open source driver options: Radeon or AMDGPU. The AMDGPU-PRO driver provides the open source AMDGPU driver and a proprietary overlay. Newer AMD GPUs designed with GCN technology (Graphics Core Next) should use AMDGPU or AMDGPU-PRO, while older AMD GPUs should use Radeon. For details on which GPUs require Radeon, please see the Radeon driver homepage or execute at a terminal:

By default Ubuntu uses the open source Radeon driver for cards manufactured by AMD. However, the proprietary fglrx driver (known as AMD Catalyst or AMD Radeon Software) is made available for those who would like to use it. The instructions on this page advise on how to install and use fglrx. Fabulatech usb over ethernet crack.

If you encounter a bug with these closed-source drivers, you are welcome to file a report via Launchpad. However, if the bug is determined to be with fglrx, this may only be fixed by AMD, as they are the only ones with access to the source code.

The first thing to check for when you consider using the fglrx driver is whether your AMD graphics card is supported.

1. Go to the AMD website.

2. Enter your graphic card details. You may check this at the terminal:

3. Identify whether your AMD graphics card model series is supported by the fglrx driver. If the search returns the latest version of the Catalyst driver, then proceed to the next section. If the search returns a legacy version, you may have to use the open source driver.

NOTE: If you are switching from another OEM's hardware, NVIDIA for instance, you must uninstall the driver for that hardware before installing the AMD driver.

Ubuntu offers the following fglrx drivers that are supported only in Ubuntu 14.04:

• fglrx-installer
  fglrx-installer-updates
  

The easiest way to install binary drivers is to use the built in Additional Drivers manager in Ubuntu.

After the fglrx driver is installed, reboot your system and login. To check whether the fglrx driver is working, open a terminal and type:

If fglrx is installed and working well you should see an output similar to:

4.1. Installing via the command line

For users who find that the Additional Drivers method does not work, please file a bug report on Launchpad about this.

Once done, the driver may also be installed from the Ubuntu repositories using the terminal.

(Note: If your machine has hybrid Intel/AMD switchable graphics, please consult the Ubuntu Forums thread here first and refer to the section titled 'Manually installing Catalyst 13.4, special case for Intel/AMD hybrid graphics' in this wiki. At the time of writing, the method described below MAY NOT WORK for Intel/AMD switchable graphics. If you have an Intel/AMD hybrid, it is advisable to wait until further instructions are available).

1. Save a backup copy of xorg.conf in case this doesn't work.

2. Remove/purge current fglrx and fglrx-amdcccle (If you have used a method outside of aptitude, apt, Software Center or Synaptic, follow the other party's instructions for removal). You will need to deliberately remove both the normal and -updates versions in recent releases of Ubuntu because it seems that attempting to remove one installs the other:

3. Reboot.

4. You may need to install the linux generic headers

5. Install the driver

   For 12.04:

   or

   From 14.04 forward, fglrx-amdcccle is included when you install fglrx, so the following will suffice:

   or

   To install the packages for hardware acceleration along with the driver:

   or

6. Generate a fresh xorg.conf BEFORE REBOOTING!

   If you are using multiple AMD graphics cards or AMD dual graphics (i.e.: notebook users), use:

7. Reboot again.

8. To confirm the drivers are working open a terminal and type:

   You should get an output similar to the following:

9. Use the Catalyst Control Center to make final adjustments to your monitor setup. If, after rebooting, you are presented with the message 'Could not apply the stored configuration for monitors', do not be alarmed. It simply means that you will have to use the Catalyst Control Center to configure your monitors as you should even in the case where this warning is not shown. This most likely to happen with multiple monitor applications (particularly if the monitors are of different sizes) and multiple graphics card applications.

5.1. Manually installing Catalyst 13.4

These instructions apply to AMD Catalyst official software distributions, versions 11 through to 13 (e.g. 11.10, 12.104, 13.12, 13.35/'14.1 beta'). Before you go about installing the fglrx driver from the official AMD Catalyst software distribution ensure to read the release notes from the AMD website.

In this how-to an AMD64 Catalyst 13.4 installation on an Ubuntu 13.1 system (Saucy) with an AMD Radeon HD 6300M will be chosen for illustrative purposes.

Note:Remember to uninstall the AMD proprietary fglrx graphics if it is already installed and reboot your system.

1. Download the driver found at the AMD website. Select System - Product Family - Product - and Operating System (Linux x86/x86_64). Select a compatible driver. To avoid complications later on, save it inside an empty folder. Unzip the driver if necessary.

2. Enable the Source Code repository in Synaptic Package Manger, then open a terminal and type:

3. Still using the terminal, navigate to the folder where you downloaded the drivers. In Ubuntu 14.04 LTS Trusty:

   If it is required, a package manager window will open and install some dependencies and after a while create the following three .deb packages:

   Note:It will also create a file called fglrx-installer_13.4-0ubuntu1_amd64.changes. If you wish you can read this file to know the changes that have been effected through AMD Catalyst 13.4 and related information.

   • For reference, the AMD driver installer can also be executed using its built-in graphical user interface, which provides options to manually generate the fglrx driver.

     Select Generate Distribution Specific Driver package - Continue - I Agree - select Build package for detected OS:Ubuntu/saucy - Continue.

4. To install the created .deb files, type:

   Note:In case any of the packages are broken, open Synaptic Package Manager and go to Edit -> Fix Broken Packages. In case you are new to Ubuntu, broken here means that some dependent packages are not yet installed. Once you sort out the issue as indicated above through the Synaptic Package Manager, the problem of broken packages should be resolved.

5. Continuing with the installation, type:

   After this command, reboot your system. If all is right, the fglrx driver that corresponds to AMD Catalyst 13.4 will be installed and working on your system. To confirm the drivers are working open a terminal and type:

   You should get an output similar to the following:

   Note:If you see any mention of MESA in the output, the fglrx drivers have not been installed correctly. See the troubleshooting section for more details You can make configuration changes through the AMD Catalyst Control Center via the Application menu.

5.2. Manually installing Catalyst 13.4, special case for Intel/AMD hybrid graphics

WARNING: This method does not appear to work with Catalyst 12.8. More information will follow as available.

WARNING: Using a method other than described in the manual instructions section above by creating a .deb file can lead to extreme difficulties. Be sure to take note of the instructions for uninstalling the driver at the end of this section, since the driver must be uninstalled using the amdconfig utility.

This method is NOT RECOMMENDED in general, but has been found by some users with Intel/AMD hybrid graphics to work.

This method PROBABLY WILL NOT WORK for HD 5xxx or earlier cards. It has been shown by some users to work only with 6xxx and 7xxx series cards.

1. Save backup copy of xorg.conf in case this doesn't work.

2. Remove/purge current fglrx and fglrx-amdcccle (If you have used a method outside of aptitude, apt, Software Center or Synaptic, follow the other party's instructions for removal).

   For some users, the fglrx-updates and fglrx-amdcccle-updates packages do not work. If you attempted to install them, also do:

3. Reboot.

4. Download the driver found at the AMD website.

5. Navigate to the directory to which the file was downloaded.

6. Make the .run file executable, using the 13.4 driver as an example (modify as needed for future versions. Note that the name of the .run file is for ILLUSTRATION only and you must be sure that you type the name of the actual file correctly).

7. Execute the .run file:

   Be sure to click 'Install Driver' as shown:
   

8. Create a new xorg.conf:

9. Reboot.

10. To confirm the drivers are working open a terminal and type:

    You should get an output similar to the following:

11. The Catalyst Control Center should now offer a choice between the integrated Intel graphics and the dedicated AMD graphics. To switch, select the graphics you want to run. Because the change is not dynamic, a reboot is required.
    

12. To uninstall after installing using this method, you MUST use the amdconfig utility:

Video hardware acceleration with the Linux AMD driver is not as full featured as other OEMs, but there is some that can be enabled. To get video hardware acceleration (tested on all currently supported releases at the time of writing), you need to add four packages after installing the driver.

You can test to see if you have installed them correctly thus:

When installed correctly, you should get the following:

From time to time a required symlink is not properly created. This will result in a shorter message than the above indicating that the driver could not be found.

The following may correct the problem.

For 64 bit systems:

For 32 bit systems:

You may see a message like this:

This message does not necessarily indicate a problem. It can be fixed however..

Open /etc/X11/xorg.conf and add the following line to Section 'Module':

7.1. MESA 'error'

If fglrxinfo gives you the following output, your installation is not completed correctly:

In this case, watch for these things:

1. Make sure that the restricted-modules package installed correspond to the kernel your are running and that you can load the fglrx driver, whether by issuing the command:

   or by verifying that the module appears in the list of loaded modules, by issuing the command:

2. It may be necessary to establish a symbolic link for the /usr/lib/dri folder, by issuing the following command:

3. You may have to deload the radeon and dri modules, by issuing:

   and:

4. Make sure you deload the module ati-agp by issuing:

   and blacklist it in:

5. Make sure you've added:

   to:

   under:

7.2. HDTV underscan

If you experience underscan when outputting video to an HDTV, this may resolve the issue:

This sets the default underscan setting to false.

7.3. Catalyst Control Center does not open from the panel icon

If you cannot get the Catalyst Control Center to launch from an icon, try from the terminal:

8.1. Known issues

• fglrx-installer not working with AMD Radeon™ HD/Mobility Radeon™ HD 4000, 3000 or 2000 series graphics card

  • For more on this, please see https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1058040.

8.2. New issues

If you have a bug in the driver provided in a supported Ubuntu repository, please file a report about this by executing at a terminal:

Once reported, please test the latest fglrx version available from AMD's website as per below. This will allow one to also report it to AMD directly, as they are the maintainers of the fglrx, and will ultimately be the ones providing a fix. Not testing the latest driver available for your card virtually eliminates the possibility of getting your bug solved.

Reporting bugs about the latest driver downloaded directly from AMD's website should be done via official AMD channels. Please do not report bugs about these drivers on Launchpad.

9.1. Technical Support

Before submitting a bug to AMD, please provide the output of the following terminal command:

Once obtained, submit a online service request. This will provide a ticket number sent to your e-mail address to track it.

As per AMD, the Unofficial Wiki for the AMD Linux Driver and Unofficial AMD Bugzilla are not supported by, or affiliated with AMD in any way. Hence, please use official AMD reporting methods if you would like your issue addressed by AMD.

• The AMD Radeon open-source driver how-to for Ubuntu

• AMD's AMDGPU open source driver for GCN (Graphics Core Next) GPUs

• AMD's AMDGPU-PRO hybrid proprietary/open-source driver for GCN (Graphics Core Next) GPUs

• AMD driver homepage https://support.amd.com

CategoryHardwareCategoryGraphics

This tutorial covers how to easily install proprietary drivers for your Nvidia or ATI video card using envy. These are the drivers that are listed in the download section of the ATI and NVIDIA Websites. Advantage to installing these drivers over the nvidia-glx or xorg-driver-fglrx are that you get a nice GUI control panel and advanced features to work with.

We will be using a script called 'envy' created by Alberto Milone.

Works with the following Linux systems or remixes of them:

• Ubuntu Gutsy Gibbon 7.10
• Ubuntu Feisty Fawn 7.04
• Linux Mint Daryna
• Linux Mint Celena

The installation Process:

1. Open a terminal and type the following as one line:

wget http://albertomilone.com/ubuntu/nvidia/scripts/ubuntu/envy_0.9.8-0ubuntu10_all.deb

2. Type sudo dpkg -i envy*.deb

3. Type sudo apt-get install -f (to ensure all dependencies are installed)

4. Type sudo envy -g to start the script

5. Now, just follow the steps presented in the GUI envy auto-installer script to complete the installation and video driver configuration

If all goes well, you should be presented with a nice hardware accelerated graphical ATI or NVIDIA accelerated environment with a GUI control panel and advanced features.